In CAS3 on the XDP512 processor, there are 3 saved mileage records.
1. To reset it, you
need to
2. Connect the adapter
to the auto.
3. Go into additional
functions, then reset the saved mileage.
4. Close windows on
the car.
5. Switch off the
ignition .. !!! Pull out the ignition key (do not disconnect the adapter from
the machine!)
6. Click on the "reset
mileage" and close the car and do not touch for about 40 minutes (GIVE THE
MACHINE SLEEP!) ..
After pass about 40 minutes
the program has to write to you. To SWITCH
ON AND OFF IGNITION.
If on the aisle somewhere 50
minutes the message does not appear but one re-recording mileage is visible ..
it is also necessary to switch the ignition on and off
Then to allow the car to fall
asleep again
And again you leave alone the
car for 20-40 minutes
After the expiration of the
second main time the program will request again to SWITCH ON AND OFF IGNITION
After that, press OK again
and wait for the message a third time .. after 3 times the mileage will be
reset.
P.S. : If you wake the car during the
reset .. then the report will be reset 40 minutes .. and you will need
additional time to reset the mileage