BMW Explorer has a possibility of record a key in BMW
F01, F02, F03, F04 F07, F10, F11, F13, F18, F25 cars
Equipped with the CAS4 system and processors
9S12XDP512 and 9S12XEP100
To write down a key by means of BMW Explorer, you need
the read Eeprom with CAS4
Eeprom can read by means of a programmator, for
example Rosfar, R270 or Xprog-M
Having read and having kept Eeprom programmatory, it
is possible to start record of keys.
It is necessary it will be convinced that your key is
suitable for programming,
for this purpose we come into CAS further in the
status of a key and we bring a key to the emergency coil on a steering column
on the right side.
Bring a key to the emergency coil , You have to see
Number key=255
BMW Number has to be number of 7 symbols for example
(9226939) – in the absence of these data the key isn't suitable for record
VIN has to be in ЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯ
Frequency of a key has to be 315, 434 or 868 – in the
absence of these data the key isn't suitable for record.
We start the program, we come into CAS
Further in an extra
options
Further in an Key
Learning
B the appeared window we choose Record of keys with
the help Dump and press further,
the window will open as we see lower on the picture
We load Dump CAS4 read by means of a programmer
the program will ask to enter ISN(Secret Key) from
DME, we Enter ISN and we press OK
Choose a free key and we press the button to write down
a key, and we bring a key to the emergency coil on a steering column
We wait for the end of procedure. Procedure lasts from
about 5 to 60 seconds.
At successful record in the appeared window there will
be instead of the 255th number of a key on which place you wrote down it, and
also wines number of the Car.
After that we press to close.
The key is written down!
P.S
Before record
it is necessary it will be convinced that the battery in a key is charged
It is
necessary it will be convinced that keys are unblocked
It is
necessary it will be convinced that the frequency of a key coincides with car
frequency
Not to
clean a key from the ignition coil before the end of procedure