DSC_87 and DSC_56 and DSC_25 saves mileage only when tyre puncture is detected.
You must
reset 3 last tyre punctures saved in memory.
HOW to DO
THAT:
1.
Completely pump a wheels
2.
Initialize the system via LCD monitor or board computer in instrument cluster
3. Make a
test drive of approx.
4. Switch
ignition OFF
5. Deflate
a tyre
6. Drive a
car till "punctured tyre" warning will appear
7. Switch
ignition OFF and pump a wheel
8.
Initialize the system via LCD monitor or board computer in instrument cluster
REPEAT SAME
PROCEDURE 3 TIMES
Once again
for idiots: Initialize
the system...Drive